Quick contact info

icon_widget_image Monday-Friday: 9am to 5pm; Satuday: 10ap to 2pm icon_widget_image Arabian Gulf Manufacturers Ltd, P.O.Box - 2143, Jeddah, Saudi Arabia icon_widget_image + 966 2 6377944 + 966 12 6365445 icon_widget_image info@agmpipes.com marketing@agmpipes.com

UPVC Pipes ASTM Schedule series

ASTM D1785/D2665 Sch. 40 PVC Pressure/DWV Pipe
ASTM D1785 Sch. 80 PVC Pressure Pipe | Solvent Weld

AGM ASTM D1785 Solvent Weld PVC Pipe product line is manufactured to meet the needs of residential, commercial, & industrial plumbing systems, and other pressure applications. With top quality raw materials and modern processing technology, our ASTM D1785 pipe meets all industry standards in addition to our own rigorous quality control standards.

For sizes 1¼” and larger, our ASTM D1785 Schedule 40 pipe is also dual rated to ASTM D2665 for DWV applications. This gives the designer, installer, and end user flexibility of one product for two distinct applications. AGM produces ASTM D1785 Solvent Weld pipe in both solid wall.

AGM uses SABIC UPVC raw materials IN ORDER TO ASSURANCE OF high quality
products.

USE OF PVC PIPE IN EXHAUST SYSTEMS

WARNING: Failure to follow these instructions exactly could result in serious injury, death, or property damage.

WARNING: Flue gas temperature should not exceed 60° Celsius. PVC pipe exposed to temperatures higher than 60° Celsius may melt or change shape, resulting in leakage of exhaust fumes and property damage.

WARNING CARBON MONOXIDE POISONING HAZARD: Vent pipe must be properly installed in accordance with all local and national plumbing and HVAC installation standards and codes.

AGM assumes no responsibility for equipment installed in violation of any code or regulation.

AGM uses SABIC UPVC raw materials IN ORDER TO ASSURANCE OF high quality products.
USE OF PVC PIPE IN EXHAUST SYSTEMS

WARNING: Failure to follow these instructions exactly could result in serious injury, death, or property damage.

WARNING: Flue gas temperature should not exceed 60° Celsius. PVC pipe exposed to temperatures higher than 60° Celsius may melt or change shape, resulting in leakage of exhaust fumes and property damage.

WARNING CARBON MONOXIDE POISONING HAZARD: Vent pipe must be properly installed in accordance with all local and national plumbing and HVAC installation standards and codes.

AGM assumes no responsibility for equipment installed in violation of any code or regulation.

**Sizes ½”, ¾” & 1” are not included in the ASTM D2665 DWV pipe standard.

Notes:
1. These dimensions are for estimating purposes only.
All dimensions are in inches [Millimeter] unless otherwise
specified.
2. ASTM Pressure Rating @ 23°C and includes 2:1 safety factor.
3. Internal diameter calculated using nominal outside
diameter and minimum wall thickness.

Note: 1 Bar = 14.504 PSI

Project Info

Category: