AGM’s DIN 8062 Solvent Weld & Gasketed Integral Bell Pipe product line are manufactured to meet the needs of residential & commercial plumbing, and other pressure applications. With top quality raw materials and modern processing technology, our DIN 8062 pipe meets all industry standards in addition to our own rigorous quality control standards.
AGM produces DIN 8062 Solvent Weld & Gasketed Integral Bell pipe in solid wall.
AGM uses SABIC UPVC raw materials IN ORDER TO ASSURANCE OF high quality products.
USE OF PVC PIPE IN EXHAUST SYSTEMS
WARNING: Failure to follow these instructions exactly could result in serious injury, death, or property damage.
WARNING: Flue gas temperature should not exceed 60° Celsius. PVC pipe exposed to temperatures higher than 60° Celsius may melt or change shape, resulting in leakage of exhaust fumes and property damage.
WARNING CARBON MONOXIDE POISONING HAZARD: Vent pipe must be properly installed in accordance with all local and national plumbing and HVAC installation standards and codes.
AGM assumes no responsibility for equipment installed in violation of any code or regulation.
Key:
a) Start of sealing area.
b) End of cylindrical part of socket and pipe.
The nominal pipe length, l, shall be a minimum length which does not include the depth of the socketed portions.
Notes:
1. These dimensions are for estimating purposes only.
All dimensions are in Millimeter unless otherwise specified.
2. SDR = Standard Dimension Ratio
3. DIN Pressure Rating between 25°C & 45°C includes 2:1 safety factor.
4. Internal diameter calculated using nominal outside diameter and minimum wall thickness.
Allowable working pressures for PVC-U pipes with a safety factor (SF) = 2,0
Allowable working pressure for PVC-U pipes with a safety factor (SF) = 2,5
